3 Layer PPR PE Co-extrusion Line

PPR PE 3 layer co-extrusion line

Diameter Range (mm): 16 20 25 32 40 50 wall thickness by request

Main Extruder Motor Power: 37kw one color use one extruder

Line Space Occupation: 33mx4mx3m

Capacity: 80-150kg/h

PPR PE 3 layer co-extrusion line description：

The production line of 3-layer co extrusion PPR pipe is a new product developed by our company by introducing and absorbing foreign advanced technology.

Characteristics of PPR 3 layer tube extruder production line ：

1. This machine is mainly used for pipe production with PPR resin as raw material.

2. The design of slotted feeder barrel and barrier screw can improve the plasticizing effect.

3. High extrusion rate, low melt temperature and uniform temperature.

4. Barrier type two pole mixing, i.e. special screw for day, slotting barrel.

5. Equipped with a new type of secondary split die, with the characteristics of low temperature and low pressure extrusion: water film sizing sleeve, to ensure the high-speed production of pipes.

6. The production line is controlled by PLC, and PPR cold and hot water pipe production line manufacturer has good man-machine interface.

7. The marking line can be selected to extrude to produce the pipe with color mark.

The production line can produce PE pipe by changing mould.

8. Random polypropylene production line is mainly used to produce pipe production line with PP-R resin as raw material, and also suitable for pipe production with PP, Pb and PE resin as raw materials. SJ-65 / 33 is used as extruder, equipped with corresponding mould, cooling device and traction device, which is used for continuous and efficient extrusion of pipes. It has the characteristics of stable quality and convenient operation.

PPR PE Pipe 3-Layer Co-extrusion Line production process
Drying of raw materials→ Extrusion molding → Vacuum sizing → Spray cooling → Haul-off → Fixed length cutting → Pipe filling and unloading

PPR PE 3 layer co-extrusion line photos

SJ65/33 extruder of PPR 4 layer co-extrusion line

1. Single screw extruder: model SJ65 / 33

2. Cylinder and screw material: 38CrMoAlA,

3. Cylinder and screw structure: barrier screw, asymmetric slotted barrel design.

4. The gearbox is equipped with strong thrust bearing and high torque output; the gear is made of special alloy, with hard tooth surface and gear grinding process;

5. Temperature control table of OMRON

6. ABB or Siemens brand inverter

7. Schneider or Siemens AC contactor

8. Siemens Bede motor

9. Diameter of screw: Φ 65mm

10. Length diameter ratio of screw: 33:1

11. Driving motor power: 55kW high speed screw

12. Gearbox: high torque, low noise, hard tooth surface grinding reducer is equipped with external cooling circulation system

Die head and mould（including the bush,pin and calibrator）

Materials: 40Cr Steel

Structure: Spiral or Basket

Single cavity or double cavity design

Single layer or co-extrusion multi-layers design

Vacuum Calibration Tank

length:6000mm

Tank materials: 4mm 304 S. S.Materials

Water temperature and level controlling technology;

High pressure and stable water jet.

Pressure protection design

Haul-Off machine :

ABB Frequency motor driving

Upper and lower caterpillar is driven separately by the frequency inverter

Fast change type pads

High friction fact and anti-wear out silicon rubber Pads

Metering counter

Cutter:

Non-dust cutter, Blade rotates around pipe and cut off pipe with smooth surface.

Synchronous control

Cast aluminium fixture unit

High Quality Alloy Blades

Smooth Cutting surface

Servo motor Synchronous control

Stacker

Stainless steel 304 as touching material

Discharge driving by air cylinder

Packaging of PPR 4 layer co-extrusion line

Exhibition of PPR 4 layer co-extrusion line